Cotton‐fabric‐grafted poly(N‐isopropyl acrylamide) initiated by ammonium peroxydisulfate

In this article, we report that thermoresponsive poly(N‐isopropyl acrylamide) (PNIPAAm) was successfully grafted onto a cotton fabric (CF) surface by free‐radical solution grafting polymerization; we obtained a thermoresponsive CF‐grafted PNIPAAm. This reaction system only contained four constituents: the monomer, solvent, initiator, and CFs. Ammonium peroxydisulfate was chosen as the initiator, and water was chosen as the solvent. A series of initiator concentrations and grafting polymerization temperatures were used in the experiments, and their effects on the grafting ratio (G) were also studied. Also, the effects of the G of CF‐g‐PNIPAAm on their corresponding thermoresponses was studied further. The structure of CF‐g‐PNIPAAm was characterized by Fourier transform infrared spectroscopy–attenuated total reflectance analysis and scanning electron microscopy analysis. The G of CF‐g‐PNIPAAm was measured by a gravimetric method. The thermoresponse of CF‐g‐PNIPAAm was characterized by modulated differential scanning calorimetry, water contact angle measurements, and wetting time measurements. The experiments manifested the following results: (1) the initiator concentration and grafting polymerization temperature both influenced G, (2) the grafted PNIPAAm covered the CF surface, (3) the CF‐g‐PNIPAAm showed thermoresponsive hydrophilicity/hydrophobicity, and (4) a relationship existed between the thermoresponse of CF‐g‐PNIPAAm and the corresponding G. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41193.     

Synthesis and characterization of polyhydroxylated polybutadiene binding 2,2′‐thiobis(4‐methyl‐6‐tert‐butylphenol) with isophorone diisocyanate

A macromolecular hindered phenol antioxidant, polyhydroxylated polybutadiene containing thioether binding 2,2′‐thiobis(4‐methyl‐6‐tert‐butylphenol) (PHPBT‐b‐TPH), was synthesized via a two‐step nucleophilic addition reaction using isophorone diisocyanate (IPDI) as linkage. First, the ? OH groups of PHPBT reacted with secondary ? NCO groups of IPDI to form the adduct PHPBT‐NCO, then the PHPBT‐b‐TPH was obtained by one phenolic ? OH of 2,2′‐thiobis(4‐methyl‐6‐tert‐butylphenol) (TPH) reacting with the PHPBT‐NCO. The PHPBT‐b‐TPH was characterized by Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance (¹H‐NMR), ¹³C‐NMR, and thermogravimetric analysis, and its antioxidant activity in natural rubber was studied by an accelerated aging test. Influences of reaction conditions on the two nucleophilic reactions between ? OH group and ? NCO group were investigated. In addition, catalytic mechanism for the reaction between PHPBT‐NCO and TPH was discussed. The results showed that the adduct PHPBT‐NCO could be obtained by using dibutyltin dilaurate (DBTDL) as catalyst, and the suitable temperature and DBTDL amount were 35°C and 3 wt %, respectively. However, triethylamine (TEA) was more efficient than DBTDL to catalyze the reaction between PHPBT‐NCO and TPH because of steric hindrance effect. In addition, it was found that the thermal stability and antioxidant activity of PHPBT‐b‐TPH were higher than those of the low molecular weight antioxidant TPH. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40942.     

Gradient and weather resistant hybrid super‐hydrophobic coating based on fluorinated epoxy resin

A weather resistant super‐hydrophobic coating that can offer good substrate adhesion and yet to be easily processed at large scale can be of practical use in emerging fields of self‐cleaning and anti‐icing paint, combing all these properties together remains challenging task. Here we describe a composite coating composed of a fluorinated epoxy resin emulsion with embedded in situ surface‐modified dual‐scale nano‐silica, which displayed durable super‐hydrophobicity and excellent adhesive strength. The as‐prepared coating possesses water contact angle of 158.6 ± 1°, sliding angle around 3.8 ± 0.2° which remain stable even under acidic/alkaline, heat/cool, and accelerated aging treatment. The results demonstrate that surface roughness had a micron‐ and nanometer scale distribution with increased particle loading beyond 40 wt %. Through quantitative comparison of surface Attenuated Total Reflection (ATR) with bulk FT‐IR transmission spectra, a gradient coating with surface enrichment of hydrophobic groups was determined. The air‐side fluorinated polysiloxane‐rich layer endows coating with weather‐resistance and ultra‐hydrophobicity while bottom epoxy resin layer enhances substrate adhesion. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40955.     

Synthesis,film morphology,and performance on cotton substrates of dodecyl/piperazine functional polysiloxane

A novel polysiloxane bearing dodecyl and epoxy side groups (DESO) was synthesized as an intermediate through hydrosilylation of polymethylhydrosiloxane with allyl glycidyl ether and 1‐dodecene. Then, dodecyl/piperazine functional polysiloxane (DPSO) was prepared through the reaction of N‐aminoethylpiperazine with DESO. The chemical structure of DPSO was characterized with FTIR and ¹H‐NMR spectroscopy and its application performance on cotton fabrics was studied. DPSO with dodecyl side groups gifted the treated fabrics with good wettability and whiteness compared with piperazine functional polysiloxane, while with a slightly reduced softness as well as thickening handle. Film morphology, orientation, and performance on cotton substrates of DPSO were investigated by scanning electron microscope, atomic force microscopy, X‐ray photoelectron microscope, and so on. Affected by the dodecyl side groups, DPSO formed relatively hydrophilic, macroscopically smooth but actually uneven films with many dodecyl side chain pillars on the treated substrate surfaces. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40186.     

β‐Cyclodextrin modified cationic acrylamide polymers for flocculating waste drilling fluids

In this article, the P(AM/A‐β‐CD/DMDAAC) is used as flocculant. The synthesis and characterization of the cationic polyacrylamide flocculant modified by β‐cyclodextrin have been studied in the early article. This article stresses its excellent flocculated performance and mechanism. In the flocculated process, the bridging flocculation played a dominant role. Through the flocculation experiments, it can be seen that the flocculating rate of the P(AM/A‐β‐CD/DMDAAC) on four solutions can go up to 93.4%, 89.7%, 85.1%, and 96.7%, respectively. As can be seen from experiment data, the flocculated property of P(AM/A‐β‐CD/DMDAAC) is superior to polyacrylamide and poly (dimethyl diallyl ammonium chloride). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40197.     

Pectins from Aloe Vera: Extraction and production of gels for regenerative medicine

Extraction, purification, and gel preparation of Aloe Vera pectin and the evaluation of the biocompatibility of the pectin gels were studied, considering as end use as implantable materials for regenerative medicine. A. Vera was chosen as source of pectin, as this pectin was described to possess high molecular weight and a low degree of esterification. As the properties of pectins are strictly dependent upon the extraction methods in combination with the natural source, the extraction method was modified in order to optimize the yield of the final product, its purity, the duration of the process and the selection of non‐toxic chemical reagents. Changing the experimental conditions resulted in four different extraction processes and products with different physical and chemical characteristics. The optimal extraction resulted to be the process: with enzimatic deactivation by microwave and the use of sodium citrate as chelating agent the molecular weight of the pectin extracted was estimated to be 118 kDa and the 2.93% esterification degree. Cytocompatibility of pectin gels, prepared by ionotropic gelation, showing an improved cell adhesion if compared to commercial pectin. The results suggest that the extracted A. Vera pectins possess interesting properties to be exploited for the production of mechanically stable gels by ionotropic gelation and high rhamnose content matrices for application in regenerative medicine. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39760.     

The solution behavior of hydrophobically associating zwitterionic polymer in salt water

The acrylamide‐based hydrophobically associating zwitterionic polymer was prepared, which was composed of dimethyl‐dodecyl‐allyl ammonium chloride as hydrophobic group and carboxyl betaine 2‐(4‐acrylamido‐propyl‐dimethyl ammonic)‐sodium acetate as functional group. Hydrophobically associating polyacrylamide (HAPAM) was also prepared for comparative study. The behaviors of polymers in pure water and salt solutions were investigated by the means of apparent viscosity test, laser light scattering, atomic force microscope, and fluorescence experiments. The viscosities of polymer solution increased with the increasing of salt concentration, which indicated that the addition of salt resulted in significant antipolyelectrolyte effect in the zwitterionic polymer solution. The results of dynamic laser light scattering experiment also showed that the average hydrodynamic diameters of the zwitterionic polymer molecules increased with the increasing of salt concentration. The network structures had been observed by atomic force microscope and the addition of salt strengthened the formation of network structures. The results of fluorescence experiment showed that the addition of salt could enhance the association of hyrophobically zwitterionic polymer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39707.     

The effect of surface treatment on graphite nanoplatelets used in fiber reinforced composites

Atmospheric plasma treatment (APT) was used to surface‐activate graphite nanoplatelets (GnP) as well as highly graphitic P100 fibers used to manufacture composites. X‐ray photoelectron spectroscopy showed an increase in the O/C ratio of the treated surfaces when using either CO or O₂ as the active gas, whereas CO exhibited less damage to the treated reinforcement carbon material. APT of P100 fibers resulted in a 75% increase in composite tensile strength when compared to composites using untreated fibers. Surface treatment of GnPs also resulted in GnP/epoxy composites with significantly higher glass transition temperatures (Tg's) and 50% higher flexural strengths than those with no surface treatment because of stronger particle‐to‐resin coupling, which was also evidenced by the fracture surfaces. The effect of GnP loading concentration and plasma treatment duration was also evaluated on the tensile strength of fiber‐reinforced composites. The addition of untreated GnP filler resulted in a decrease in strength up to the 1% loading. However, higher loading conditions resulted in a 20% improvement because of GnP orientation effects. Fracture surfaces suggest that the fibers provided a mechanism for the GnPs to orient themselves parallel to the fiber axis, developing an oriented matrix microstructure that contributes to added crack deflection. Incorporating surface‐treated GnPs in these composites resulted in tensile strengths that were as high as 50% stronger than the untreated systems for all loading conditions. Increased GnP‐to‐matrix bonding as well as enhanced orientation of the GnPs resulted in multifunctional composites with improved mechanical performance. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39994.     

Poly(ethyleneterephthalate) glycolysates as effective toughening agents for epoxy resin

The potential of poly(ethyleneterephthalate) glycolysates toward improving the energy absorption characteristics of cycloaliphatic epoxy resins has been explored. Microwave‐assisted glycolytic depolymerization of PET was performed in the presence of polyether diols of different molecular weights. The obtained glycolysates were blended with epoxy, and their mechanical properties were studied under both quasi‐static and dynamic conditions. Significant improvements were observed, which were found to depend both on the amount as well as nature of glycolysate. Amine functionalities were introduced at the terminal positions of glycolysates to improve the compatibility between the two phases. The amine derivatives exhibited superior performance and the Mode I fracture toughness (K_IC) of epoxy increased by ～18% in optimized compositions, which is indicative of its improved notch sensitivity. Neat epoxy specimens fractured in a brittle fashion, but all the blends exhibited ductile failure, as evidenced by surface morphological investigations. The mechanical properties of epoxy blends prepared with analogous aliphatic polyols, both before and after amine functionalization, were also studied which clearly reveal the beneficial role of aromatic groups toward improving the toughness of the base cycloaliphatic epoxy resin without compromising on the material stiffness. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39941.     

Enhanced performance by polyaniline/tailored carbon nanotubes composite as supercapacitor electrode material

Polyaniline/tailored carbon nanotubes composite (PANI/TCN) synthesized via situ polymerization of aniline monomer in the presence of tailored carbon nanotubes (TCN) is reported as electrode material for supercapacitors. The morphology, structure, and thermostability of the composite were characterized by scanning electron microscope, Fourier transform infrared, and thermogravimetric analysis. The electrochemical property of the resulting material was systematically studied using cyclic voltammetry and galvanostatic charge–discharge. The results show that the short rod‐like PANI dispersed well in the TCN with three‐dimensional network structure. The as‐prepared composite shows high specific capacitance and good cycling stability. A specific capacitance of 373.5 F g^?1 at a current density of 0.5 A g^?1 was achieved, which is much higher than that of pure PANI (324 F g^?1). Meanwhile, the composite retains 61.7% capacity after 1000 cycles at a scan rate of 50 mV s^?1. The enhanced specific capacitance and capacity retention indicates the potential of composite as a promising supercapacitor electrode material. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39971.